Power centres for AXIS A1001

  • Indoor, outdoor & rack mounting options.
  • Mounting kit with spares included.

The DA890 Range of power centres is designed specifically for the AXIS 1001 access controller.

DA774 Access control Power centres

  • Integrated UPS function with VRLA battery back-up
  • Mains failure & Low-battery clean contacts
  • Remote switching of output PCB state (Fire enable)
  • Mild steel key-lockable enclosure with removable hinged lid & tamper switch

Power Centre for up to four Paxton NET2 controllers

Suitable for mounting four controllers, as well as providing lock and system power. It has a built-in 12V DC battery-backed power supply unit, designed for ease of use and reliability. Access control equipment can be housed and powered from one neat and tidy central location. Just add PCBs & batteries.

Access control Tri-relay module

  • Extend fire & access control loops
  • Easy installation
  • Mount in existing enclosures
  • Compatible with DA301 High-security junction box

Designed for extending critical control circuit loops for access control and fire systems, the Tri-relay unit is ideal for when installing new equipment or extending systems.

DA475: Dual PCB Mounting caddy

Stack two access control PCBs on one mounting position.

  • Fit two controllers to one set of mounts
  • RM4 Controllers
  • Paxton Net2
  • Lenel Access control PCBs

DIN Rail-mounting power supplies

  • Optional remote enable or disable of output power
  • Clip-on multiple output PCB module available
  • Push to restart for Emergency Stop use.
  • Start from battery power function
  • Mains & low-battery monitoring contacts
  • Battery back-up support
  • Automatic battery protection

Power Centre for up to two Paxton NET2 controllers

The DA481 is an access control enclosure suitable for mounting two controllers (or other equipment), as well as providing lock and system power. It has a built-in 12V DC battery-backed power supply unit, designed for ease of use and reliability. Access control equipment can be housed and powered from one neat and tidy central location. Just add PCBs & batteries.

DA454: 19" 2U 10A 12V DC Rack-mount Power Centre

  • 10 Load outputs: 8 x 1A & 2 x 3A
  • Remote output control for fire alarm systems
  • Quick-release front cover with tamper micro-switch
  • Front panel access to terminations and battery compartment
  • Houses and maintain a VRLA stand-by battery of up to 7Ah
  • Mains failure & Low-battery signalling
  • Automatic battery protection

DA457: 12V DC 3U Rack-mount power supply with VRLA battery support and monitoring

  • Integrated UPS function (2 x 12Ah) VRLA Battery back-up
  • Fire enable
  • Mains failure & Low-battery signalling
  • Automatic battery protection
  • 19" 3U rack-mountable enclosure
  • Input either 110V or 230V
  • Front panel access to terminations
  • Made in Britain with 5 year warranty

Door interlock modules

A typical door interlock controller is used to ensure that there is always at least one locked door between inner and outer environments. Why use an interlock? The system requires the user to pass through two-doors in series to enter the area. If the doors are interlocked, both doors cannot be open at the same time.

This is ideal for keeping two areas separate from shared noise, temperatures and ambient light levels. These are also ideal for maintaining hygiene or security within an area.

DA369:
12V 3A DC & 16V 5A AC

  • Input 230V AC @ 50Hz (+/- 10%)
  • 12V DC 3A (13.7V) output
  • 16V AC 5A output
  • House and charge a VRLA battery up to 7Ah capacity

This power supply provides 12V DC (13.7V) 3A & 16V AC 5A. The supply will house and charge a VRLA battery up to 7Ah capacity. Ideal for use where a DC supply is required for a controller and an AC supply is required for the door release or vice versa.

More Dantech products

SecurePoE+ Power over Ethernet

The SecurePoE product family is designed to provide highly reliable PoE+ power for any network device, from a secure and practical package. Products are compliant with IEEE802.3:2012 (802.3at, 802.af) and designed for use with all compatible load devices. All versions feature secure plug and play connectivity with no software management. This allows deployment without programming and prevents remote interference with the power network.

Midspan

Secure tamper resistant PoE power, providing devices with up to 30W of PoE+ power each.

  • Indoor, IP66 rated & Rack-mount
  • 30W PoE+ per port
  • Independent PoE channels

Multispan

Find out more about our network switched PoE units.

  • Indoor, IP66 rated & Rack-mount
  • 30W PoE+ per port
  • Integrated Network switch

MidspanUPS

Find out more about our 1.2Ah, 7Ah & 10Ah battery-backed secure PoE units.

  • Indoor, IP66 rated & Rack-mount
  • 30W PoE+ per port
  • Integrated battery back-up
  • Independent PoE channels

MultispanUPS

Find out more about our network switched battery-backed PoE units.

  • Indoor, IP66 rated & Rack-mount
  • 30W PoE+ per port
  • Integrated Battery back-up
  • Network switching