19" Rack-mount Power Centre for AXIS A1001 Network door controller or I/O modules

Compact 2U 19" mounting package
Tidy 19” rack installation for office, retail and data centre
Simple layout, easy to install and connect
User-selectable 12V DC or 24V DC lock output voltage
All the A1001’s features and functions remain available to the integrator
Outputs can be configured to power auxiliary devices
Fits 1 x A9188 I/O, A9161 I/O or P8221 Audio I/O unit
Indoor secure steel enclosure with tamper monitoring
Enables multiple controllers in small floor space

DA890RM: 19" Rack-mount Power Centre for AXIS A1001 Network door controller or I/O modules

Easily install an AXIS A1001 Network door controller within the mild steel wall mount secure enclosure with tamper monitoring of the DA890IN for professional installations. Choose between mains or PoE+ to provide power for the controller and locks.

All of the DA890 Power centre range provide battery back-up support providing uninterrupted power during power failures, signalling contacts for mains power failure and low-battery monitoring in addition to providing lock power controlled by the A1001 Network door controller. PCB jumpers enable simple configuration of the system. Select 12V or 24V DC power for locking systems, control and choose which outputs are switched on or off when signaled by a fire panel or other system.

Ordering information

Technical information

Download Data sheet

Outputs: A1001 controller power

Fused	Self-reseting fuses
Connection type	Rising clamp PCB terminal block
Output	1 x 1A 12V DC

Outputs: Lock power availability

Fused	Self-reseting fuses
Connection type	Rising clamp PCB terminal block

Input	Output selection	Output
Mains 90-270V AC	12V	2A 12V DC via 2 outputs
Mains 90-270V AC	24V	1A 24V DC via 2 outputs

note: current shown is total across both lock outputs

Inputs: Mains power

Power on indication	LED Indication
Voltage	90-270V AC, 47-63Hz
Fused	3A fast blow 20x5mm HRC fuse
Connection type	10mm² internal terminal block (3 x 1.5mm² or 2 x 2.5mm²)
Power consumption	≤ 60W

VRLA Stand-by battery

Type	12V 7Ah VRLA (e.g. Yuasa NP7-12)
Fused	20 x 5mm fast blow 10A glass fuse
Connection type	Battery lead with push fit connectors, PCB terminal block (2.5mm²)
Battery protection	Automatic battery disconnect/reconnect deep-discharge protection

note: recommended operation is with stand-by battery fitted.

Monitoring contacts: Mains fail & Battery low-voltage

Contact configuration	2 x SPCO single-pole change-over
Rating	Maximum switching 30V 1A AC/DC
Connection type	Rising clamp PCB terminal block (2.5mm²)

Environmental

Operating temperature	-10°C to +40°C
Storage temperature	-20°C to +50°C
Operating relative humidity	Maximum 95% non-condensing
Ingress protection	IP20

Dimensions

Product

Width	480mm (Standard 19" Rack-mounting)
Height	89mm (2U Standard rack-mount)
Depth	505mm
Weight	≤ 6.1Kg
Enclosure material	Mild steel powder-coated, textured matt black

Ordering information

GTIN	Part code	Description
	DA890RM	Dantech 19" 2U Rack-mount Power Centre for AXIS A1001 Network door controller

Available from all good distributors.

Other models

GTIN	Part code	Description
	DA890IN	Dantech Indoor Power Centre for AXIS A1001 Network door controller
	DA890EX	Dantech IP66 Weather-resistant Power Centre for AXIS A1001 Network door controller
	DA890INQUAD	Dantech large indoor Power Centre for AXIS A1001 Network door controller
	DA890INQUADSW	Dantech large indoor Power Centre with integrated network switch for AXIS A1001 Network door controller

Available from all good distributors.