Large Indoor Power Centre with integrated network switch for four AXIS A1001 Network door controllers or I/O modules

  • Single wall-mount unit fits up to four A1001 controllers
  • Includes 5-port switch for single cable network connection
  • Power provision for network switch, controllers and locks
  • User-selectable 12V DC or 24V DC lock output voltage
  • Single mains-input connection
  • Fits 2 x A9188 I/O, A9161 I/O or P8221 Audio I/O units
  • Compact housing includes cable management trunking
  • All the A1001’s features and functions remain available to the integrator
  • Indoor secure steel enclosure with tamper monitoring

DA890INQUADSW: Large Indoor Power Centre with integrated network switch for four AXIS A1001 Network door controllers or I/O modules

Easily install an AXIS A1001 Network door controller within the mild steel wall mount secure enclosure with tamper monitoring of the DA890 for professional installations. Choose between mains or PoE+ to provide power for the controller and locks.

All of the DA890 Power centre range provide battery back-up support providing uninterrupted power during power failures, signalling contacts for mains power failure and low-battery monitoring in addition to providing lock power controlled by the A1001 Network door controller. PCB jumpers enable simple configuration of the system. Select 12V or 24V DC power for locking systems, control and choose which outputs are switched on or off when signaled by a fire panel or other system.

Ordering information

Technical information

Download Data sheet

Outputs: A1001 controller power

FusedSelf-reseting fuses
Connection typeRising clamp PCB terminal block
Output4 x 1A 12V DC

Outputs: Lock power availability

FusedSelf-reseting fuses
Connection typeRising clamp PCB terminal block
InputOutput selectionOutput
Mains 90-270V AC12V8A 12V DC via 8 outputs
Mains 90-270V AC24V4A 24V DC via 8 outputs
note: current shown is total across all lock outputs

Inputs: Mains power

Power on indicationLED Indication
Voltage90-270V AC, 47-63Hz
Fused3A fast blow 20x5mm HRC fuse
Connection type10mm² internal terminal block (3 x 1.5mm² or 2 x 2.5mm²)
Power consumption≤ 150W
note: use mains or PoE+ supply

VRLA Stand-by battery

Type12V ≤17Ah VRLA (e.g. Yuasa NP7-12, NP17-12)
Fused20 x 5mm fast blow 10A glass fuse
Connection typeBattery lead with push fit connectors, PCB terminal block (2.5mm²)
Battery protectionAutomatic battery disconnect/reconnect deep-discharge protection
note: recommended operation is with stand-by battery fitted.

Monitoring contacts: Mains fail & Battery low-voltage

Contact configuration2 x SPCO single-pole change-over
RatingMaximum switching 30V 1A AC/DC
Connection typeRising clamp PCB terminal block (2.5mm²)

Environmental

Operating temperature-10°C to +40°C
Storage temperature-20°C to +50°C
Operating relative humidityMaximum 95% non-condensing
Ingress protectionIP20

Dimensions

Product

Width495mm
Height695mm
Depth120mm
Weight≤ 9.1Kg
Enclosure materialMild steel powder coasted. White RAL9016

Ordering information

GTINPart codeDescription
DA890INQUADSWDantech large indoor Power Centre with integrated network switch for AXIS A1001 Network door controller

Available from all good distributors.

Other models

GTINPart codeDescription
DA890INDantech Indoor Power Centre for AXIS A1001 Network door controller
DA890EXDantech IP66 Weather-resistant Power Centre for AXIS A1001 Network door controller
DA890RMDantech 19" 2U Rack-mount Power Centre for AXIS A1001 Network door controller
DA890INQUADDantech large indoor Power Centre for AXIS A1001 Network door controller

Available from all good distributors.