IP66 Weather-resistant SecurePoE Multispan PoE injector

  • Multispan power injector with 1, 2 or 4 load output ports
  • 30W of load power availability per port, to IEEE 802.3:2012
  • 90-270V AC, 47-63Hz universal mains-input
  • System power status LED & monitoring contacts
  • Individual port power status LEDs and monitoring contacts
  • Monitoring relay contacts can be used for analogue or network interface
  • Innovative fast entry cable system
  • Tamper-switched secure weather-resistant enclosure
  • Automatic load-class detection

DA1100-EX: IP66 SecurePoE Multispan 30W PoE injector

This Multispan PoE injector is ideal for outdoor and harsh environments, where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

All SecurePoE Multispan models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connection to all ports with a single or dual Ethernet connections from the SecurePoE unit to existing network infrastructure.

Gigabit and 10/100Mbs versions are available.

All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.

Ordering information

Multispan with integrated 5-port network switch

Multispan and MultispanUPS products include a 5-port network switch. Available in an indoor mild steel wall mount enclosure, exterior IP66 weather-resistant enclosure ideal for harsh environments, or simply as a 1U rack-mount product.

These switched Multispan models are ideal for installations where there is limited access to, or availability of, Ethernet ports on the network. Only a single Ethernet data cable is required to send and receive data from up to four devices, whether or not they require Power over Ethernet.

Technical information

Download Data sheet

Ordering information

GTINPart codeDescription
DA1100-EX-1-GIP66 SecurePoE Multispan 1 x 30W Gigabit PoE+ injector
DA1100-EX-2-GIP66 SecurePoE Multispan 2 x 30W Gigabit PoE+ injector
DA1100-EX-4-GIP66 SecurePoE Multispan 4 x 30W Gigabit PoE+ injector

Other models

GTINPart codeDescription
DA1100-IN-1-GIndoor SecurePoE Multispan 1 x 30W Gigabit PoE+ injector
DA1100-IN-2-GIndoor SecurePoE Multispan 2 x 30W Gigabit PoE+ injector
DA1100-IN-4-GIndoor SecurePoE Multispan 4 x 30W Gigabit PoE+ injector
DA1100-RM-4-G19" rack-mount SecurePoE Multispan 4 x 30W Gigabit PoE+ injector

Available from all good distributors.

You may also be interested in...

DA220: Universal relay

  • 12V DC-powered DPCO Relay
  • Tamper switch
  • Contact rating 30V DC 1A
  • Flame-retardant

Typical uses include changing the polarity of signals and switching higher currents and voltages (30V DC MAX). It can also be used as an interface between different systems, e.g. intruder alarm to access control or fire alarm to access control.

Door interlock modules

A typical door interlock controller is used to ensure that there is always at least one locked door between inner and outer environments. Why use an interlock? The system requires the user to pass through two-doors in series to enter the area. If the doors are interlocked, both doors cannot be open at the same time.

This is ideal for keeping two areas separate from shared noise, temperatures and ambient light levels. These are also ideal for maintaining hygiene or security within an area.

DA262: Mains-powered relays with integrated UPS back-up

  • Integrated mains-powered 12V DC
  • Integrated UPS function VRLA battery back-up
  • Available with eight or sixteen DPCO Relays
  • Tamper-switched
  • Contact rating 30V DC 1A
  • Flame-retardant

A mains-powered universal relay unit with VRLA battery back-up support and either eight or sixteen independent DPCO relays. Each relay operates at 12V DC and can switch up to 30V DC 1A. The power supply unit provides 12V (13.7V) DC 1.5A to power the relay PCB cards. Each relay card also has an inhibit line that can de-energise all 8 relays per PCB when pulled high. A VRLA battery of up to 7Ah can be fitted in the enclosure and charged by the power supply to enable battery back-up.

DA816: 200mm Slim rack mount cabinet

  • Optional 4-way IEC connector PDUtwin cooling fans
  • Versatile 4U and 2U brackets
  • Horizontal and vertical equipment mounting
  • Removable hinged and lockable lid
  • Lid tamper micro switch

A wall-mountable slim rack cabinet. Create a secure mini communications room in a slim wall-mounted cabinet or simply as a CAT5 'Junction Box'. The unit allows for many configurations of 19" rack mounting equipment.