This page has been translated from English. If you would like to recommend any improvements, please contact us.
Dantech Electronic Engineering, powering security.

The SecurePoE product family is designed to provide highly reliable PoE power for any network device, from a secure and practical package. Products are compliant with IEEE802.3:2012 (802.3at, and designed for use with all compatible load devices. All versions feature secure plug and play connectivity with no software management. This allows deployment without programming and prevents remote interference with the power network.

Estimated stand-by times
Output loadBattery capacity
5WHours65 Hours100 Hours
12WHours30 Hours44 Hours
25W1.75 Hours14.5 Hours20 Hours
50W40 Minutes6.5 Hours9.5 Hours
75W23 MinutesHoursHours
100W14 Minutes2.75 HoursHours
  • Secure tamper-monitored enclosures with all connections inside
  • Mains and power status monitoring contacts
  • Outdoor (IP66), 19" rack and indoor wall-mounting models available
  • Guaranteed 30W per channel power capability to all outputs
  • 90-270V AC, 47-63Hz universal worldwide mains input
  • Ultra high efficiency operation - up to 96% (tested with 120W load)
  • Designed to allow installers to connect to PoE powered devices
    allowing easier installation, set-up and maintenance
Product type
Battery support

Midspan & MidspanUPS™

Multispan & MultispanUPS™

Midspan & MidspanUPS products provide dedicated PoE power for use with a separate network switch, for highest possible system reliability.

Multispan & MultispanUPS PoE+ switch products include a gigabit Cisco network switch, allowing fast single cable connection to any network infrastructure. Pairing a separate network switch and dedicated power unit ensures reliability and convenience.