  |
 |
3Amp PSUs |
Technical Information
 |
DA369
A power supply with 1 x 3 Amp 12V DC (13.7V) output which will house and charge one VRLA battery up to 7Ah capacity. Plus 1 x 5A 16V AC output. Ideal for use where a DC supply is required for a controller and an AC supply is required for the door release or vice versa. Metal Cased.
Technical Information |
 |
DA422
A power supply with 1 x 3 Amp 12V DC (13.7) output which will house and charge one VRLA battery up to 12Ah capacity. Typical uses are for powering detection devices, Rio’s, LIMs, door access controllers, electric releases and maglocks. Metal Cased.
Technical Information |
Technical Information
AC/DC POWER SUPPLIES Input Voltage UK Mains
All metal cases are finished in a white gloss powder coating. All metal chassis are 4mm Aluminium.
| Model No |
DA369 |
DA422 |
| Current (Amps) |
1 x 3 (DC)
1 x 5 (AC) |
3
N/A |
Voltage
(nominal) |
13.7V DC
16V AC |
13.7V |
Recommended
Battery Size |
7Ah |
12Ah
N/A |
| Low Volts Indication |
N/A |
N/A |
| Mains Fail Indication |
N/A |
N/A |
| Tamper Switch |
YES |
YES |
| Case / Chassis |
METAL |
METAL |
| Weight (Kg) |
3.650 |
3.800 |
Dimensions
W x H x D |
245 x 225 x 80 |
245 x 225 x 100 |
Note: A large, tamper protected, enclosure (DA305) is available for the DA370 & DA380 which will house up to 2 x 12V DC 24 Amp Batteries. (See ‘ANCILLARY PRODUCTS’ section)
These products are part of the wide range of items we manufacture for the security industry.
We are constantly widening our range by adding new items as technology advances. Data sheets are available on request.
We also design & manufacture
to customers special requirements.
|
